|
|
Fluoro-resin
that's beyond the common knowledge of fluoro chemical
Fluon® LM-ETFE AH series
is a fluoro-resin which have an adhesive properties, and is possible
to adhere with other materials by melting down. It can be applied
directly without privilege adhesive agent or surface treatment that
is used at previous s ystem.Excellent adhesiveness of the two-layer
system is effected for only one step. Furthermore, the conventional
properties such as anti stick, excellent moldability and chemical
resistance, are same as conventional fluoro-resin. |
 |
|
|
 |
 |
 |
| Conductive type AH-3000 |
Non-conductive type AH-2000 |
|
 |
| Multi-layer tube by AH Series/other materials |
|
| Basic properties of Fluon® LM-ETFE AH Series |
| terms |
standard |
unit |
AH-2000
(Non-conductive type) |
AH-3000
(Conductive type) |
LM-730AP
(Conventional ETFE) |
| Melt Flow Rate |
ASTM D3159
(297ºC, 49N) |
g/10min |
25 |
25 |
25 |
| Specific gravity |
ASTM
D792 |
- |
1.78 |
1.80 |
1.78 |
| Melting point |
- |
°C |
240 |
240 |
225 |
| Tensile strength |
ASTM
D638 |
MPa |
49 |
35 |
40 |
| Elongation |
ASTMD638 |
% |
420 |
350 |
400 |
| Flexural modulus |
ASTM
D790 |
MPa |
790 |
1240 |
650 |
| Izod impact
strength 23deg.C |
ASTM
D259 |
- |
Non-Break |
Non-Break |
Non-Break |
Permeation rate
(CE10, 60deg.C) |
JIS
Z0280
(Cup method) |
g*mm/m2*24h |
2.6 |
2.0 |
4.9 |
| Surface resistivity |
- |
Ω/sq
|
- |
1.0×103 |
- |
|
|
(C)Copyright ASAHI GLASS CO.,LTD 2005-2007. All Rights Reserved. 
