|
|
|
Fluon®ETFE
- Thermoplastic Fluoropolymers
with great mouldability |
|
Fluon®ETFE is a unique
thermoplastic Fluoropolymers developed by Asahi Glass, Fluon®ETFE
combines improved mechanical properties, great Mouldability, and excellent
electrical properties and chemical resistance.
With the characteristics of Fluoropolymers, extrusion moulding, injection
moulding, and powder coating are possible, as with general thermoplastic
resins.
Fluon®ETFE gives good value for money & performance.
Within this site, effective solutions in chemical pipe lining applications
are presented. |
| Surface is flat and smooth |
| Fluon®ETFE |
ECTFE |
Fluon®PFA |
 |
 |
 |
|
| Fluon®LM-ETFE is a
new fluororesin which combines the excellent properties in heat resistance
and other mechanical properties owned by ETFE resin and the low melting
point. |
| Fluon®LM-ETFE AH series
is a fluoro-resin which have an adhesive properties, and is possible
to adhere with other materials by melting down. It can be applied
directly without privilege adhesive agent or surface treatment that
is used at previous system.Excellent adhesiveness of the two-layer
system is effected for only one step. Furthermore, the conventional
properties such as anti stick, excellent moldability and chemical
resistance, are same as conventional fluoro-resin. |
|
AFLAS®
- Fluoroelastomer with
High resistance to High concentration acids and alkalines |
|
AFLAS® has excellent
properties, especially such as heat resistance, chemical resistance,
and steam resistance.
AFLAS® will meet the Applications where higher reliability
is required. Within this site new cost-cutting solutions will be presented
to assist perfluoroelastomer users who are interested in serious cost
efficiency. |
| Ethylenediamine (Room Temperature for
70 hours) |
| AFLAS® |
FKM(Peroxide curable terpolymer) |
FKM(Bisphenol curable dipolymer) |
 |
 |
 |
|
PTFE
occupies 60-70% of the total demand for fluoropolymers.
Although discovered more than 60years ago, its application is still
being explored in new field, because of its many excellent properties.
You can select best grade from our various kinds of products.
|
|
Fluon®PFA
- Easy processable perfluoropolymer |
|
Fluon®PFA
has excellent chemical, electrical, mechanical and surface properties
which are characteristic as perfluoropolymer, in addition to the properties
of a thermoplastics that can be melt-processed.
We introduce our unique products, such as high flow grade, ultra-pure
grade for semiconductor.
|
|
Fluon®ETFE
Film - Fluoropolymer Film made
of Fluon® ETFE with great weatherability and
thermal stability |
|
| ETFE
film is a high sophisticated film that is consistently produced Asahi
Glasss. It is not including plasticizer or adheisive. Therefoer the
excellent properties of fluoro-resin appear directly. It is used in
various fields such as electric, aircrafts, space, solar battery and
kitchen equipments, becaouse of high heat resistance, high chemical
resistance, non stick and excellent electrical properties. |
| printed circuit board |
Energy relation |
 |
 |
|
|
F-CLEAN®
- Top quality film for
greenhouses |
|
F-CLEAN®,
produced by Asahi Glass Company, Ltd., is a Ethylene-Tetrafluoroethylene
copolymer (ETFE) film used as the preferred covering material for
horticultural greenhouses.
- High tensile strength compared with other plastic films
- High visible light transmission exceeds 90% and provides an
environment inside the greenhouse very similar to outdoors.
- Low degradation from sunlight and heatuseul lifetime usually
exceeds ten years.
- Very easily cleaned by rain and snow.
|
| The example of construction 1 |
The example of construction 2 |
 |
 |
"F-CLEAN®" is registered trademark of AGC
GREEN-TECH CO., LTD in USA, China, South Korea, and Japan.
|
|
|
(C)Copyright ASAHI GLASS CO.,LTD 2005-2007. All Rights Reserved. 
